Home > Accessories
This listing features BRAND NEW,50W 6 ohm Load Resistors with T-Tap included.
- Brand New and high quality;
- Can be used with vehicle turn signal lights's LED conversion;
- Solve hyper flash or no blinking of turn signal;
- Each LED bulb installation requires one resistor connected in parellel(see picture below for instruction);
1. Ten pieces of BRAND NEW Load Resistors;
2. Twenty pieces T-Taps.
1. Voltage:DV 12V
2. Number: 50W 6 ohm LED Load Resistors
3. Type:One LED resistor is required for each turn signal bulb or each license plate light bulb.
4. Height: 15mm
5. Lenght: 50mm
6. Weight: 31.47g
- Solution for "bulb out signal" / "OBC error message" after installing SMD LED light bulb
- Solution for fast turn signal blinking response after installing SMD LED light bulb
Common Part Number
|Cross Reference Part Number|
|1157||BA15s 1016 1034 1076 1130 1154 1157 1158 1493 2057 2357 2397 7528|
|1156||BAY15d 1073 1093 1129 1141 1156 1159 1295 1459 1619 1651 1680 7506 S25 7527|
|7443||7444 7443 7441 7440 T20|
|7440||992A 7440 (A refers to Amber) T20|
|3157||3057 3155 3357 3457 4157|
|3156||3056 3456 4156|
- If they don't light after inserting into the socket,insert oppositely
- When using LED bulbs for turn signal,you will need to use the above load resistor or decoder set to prevent hyper flash or bulb malfunction.
One resistor is required for each LED turn signal bulb connect one wire to ground and the other wire to the turn/brake wire. You can use the T-taps so you don't have to cut your car's wiring. One load resistor is required for each signal bulb.
These Load Resistors will get really hot as a working halogen bulb.Please mount them steadily onto metal surface and keep them off of any plastic parts to avoid plastic from melting down.
Contact: Mr.Herman Liu
Phone: 0086 18802603655
Tel: 0086 769 87005152
Add: KaiDa Industrial Park A8, QiaoChang Road, Qiaotou Town, Dongguan, Guangdong, China